My AVAA C214 is double-blinking blue during 60 seconds

Either the router is powered off or the credentials given during the process are incorrect.Please check that the router is up and running. Check the credentials. Check that the wifi band is 2.4 GHz.

My AVAA C214 is double-blinking blue during 60 seconds

My AVAA C214 has connected (blue LED Full) but my smartphone does not see it

This means that credentials have been sent to the AVAA C214 and the router was able to assign an IP address to the AVAA C214. There are too many stages in the network such as repeaters, switches, etc. The smartphone switched network to return to its preferred network. As a result smartphone and AVAA C214 are [...]

My AVAA C214 has connected (blue LED Full) but my smartphone does not see it

What is the best position for the AVAAs?

The AVAAs are pressure-based absorbers and will therefore be most effective in location where the pressure build-up is greatest. As it is almost impossible to model the acoustic behaviour in a room, the following rules offer a rapid way of find the best positions: In the corners.Corners will generally be most the most effective location as [...]

What is the best position for the AVAAs?

Do PSI Audio products work in all countries? How do I know which fuses I need?

Yes PSI Audio products will work in all countries. It is important however that the voltage is set to match the voltage of the mains (i.e.  230 V or 115 V). This is normally done by the importer who will make sure the products are set up for the local network. The procedure is explained in [...]

Do PSI Audio products work in all countries? How do I know which fuses I need?

What is so special about Class G/H amplifiers?

Classes G and H offer enhancements to the basic class AB design. Class G uses multiple power supply rails of various voltages, rapidly switching to a higher voltage when the audio signal wave has a peak value that is a higher voltage than the level of supply voltage, and switching back to a lower supply voltage when the peak value [...]

What is so special about Class G/H amplifiers?

Why is phase compensation so important?

In a multi-way speaker system, the crossover filters as well as the transducers inevitably introduce phase distortion and consequently also variations of group delay. The group delays are higher in low frequencies than in high frequencies. Theses create a separation in time between the low and high frequencies which typically gives multi-way speakers a “hollow” sound. [...]

Why is phase compensation so important?

What is the warranty on PSI Audio products?

The warranty period is 5 years on all of PSI Audio products and on component and manufacturing defects. If you register your product using this form, you will receive an additional year of warranty (total of 6 years).

What is the warranty on PSI Audio products?

Can the firmware of the AVAA C214 be updated?

Yes, when new firmware is available, an update will be displayed in your app. You can then download and install it over the wireless network.

Can the firmware of the AVAA C214 be updated?
Go to Top